Elation Professional DESIGN WASH 250 - Manual (Page 5)

4 DESIGN WASH 250 USER MANUAL V1.0 NR
For safety reasons, please be aware that all modifications on the device are forbidden.
If this device will be operated in any way different to the one described in this manual, the product may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
short-circuit, burns, electric shock, lamp explosion, crash, etc.
INSTALLATION INSTRUCTIONS
a) Installing or replacing the lamp
CA UTION
Onl y install the lamp with the device unplugged from the mains.
CA UTION
The lamp has to be replaced when it is damaged or deformed.
Before replacing the lamp let the lamp cool down, because during operation, the lamp can
reach very high temperature.
During the installation of halogen lamps do not touch the glass bulbs bare handed. Always use a cloth
to handle the lamps during insertion and removal.
Do not install lamps with a higher wattage. They generate higher temperatures than which the device
was designed for.
For the installation, you need one: Philips MSD250/2 GY9.5 lamp
Procedures:
1) Unscrew the 2 screws (A,B)on the bottom of the housing, holding the plate where the lamp is
underneath. Carefully remove the metal plate.