Eaton Electrical Powerware BladeUPS Bar - Manual (Page 5)

EATON Powerware ® BladeUPS ® Bar Installation Guide S 164201723 Rev P01 1
Chapter 1 Introduction
Up to six of Eaton’s Powerware ® BladeUPS ® uninterruptible power
systems (UPSs) can be installed in an industry standard rack outfitted
with a BladeUPS Bar 60 for interconnecting the cabinets’ wiring.
Figure 1 shows an installed BladeUPS Bar 60. The wireway fits into the
bottom 6U of standard rack space.
BladeUPS Bar 60
Wireway
Front Covers
Figure 1. BladeUPS Bar 60 Installed in Rack