Airlink AR315W - Manual (Page 10)

6
Chapter 2
Installation
This chapter covers the physical installation of the Wireless Router.
Requirements
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable
modem (for WAN port usage)
• To use the Wireless Router, all Wireless devices must be compliant with the IEEE802.11b
or IEEE802.11g specifications.
Procedure
Note: Prior to connecting the router, be sure to power off your computer, DSL/Cable modem,
and the router. You should setup the router with a wired connection first before attempting to
setup any wireless connection.
2