Airlink AR315W - Manual (Page 46)

42
Connection Log
Connection Log
• The Connection Log shows status messages relating to the
existing connection.
• The "Clear Log" button will restart the Log, while the Refresh
button will update the messages shown on screen.
Buttons
Connect If not connected, establish a connection to your ISP.
Disconnect If connected to your ISP, hang up the connection.
Clear Log Delete all data currently in the Log. This will make it easier to read
new messages.
Refresh Update the data on screen.
Connection Status - Telstra Big Pond
An example screen is shown below.
Data - Big Pond Screen
Connection
Physical Address The hardware address of this device, as seen by remote devices.