Airlink AR315W - Manual (Page 69)

Advanced Features
65
WAN Port Configuration
The WAN Port option is on the Advanced menu.
Figure 5: WAN Port Screen
Data – WAN Port Screen
Identification
Hostname
Normally, there is no need to change the default name, but if your ISP
requests that you use a particular Hostname, enter it here.
Domain Name
If your ISP provided a domain name, enter it here. Otherwise, this
may be left blank.
WAN Port MAC
Address Also called Network Adapter Address or Physical Address. This is a
low-level identifier, as seen from the WAN port.
Normally there is no need to change this, but some ISPs require a
particular value, often that of the PC initially used for Internet access.
You can use the Copy from PC button to copy your PC's address into
this field, the Default button to insert the default value, or enter a
value directly.
IP Address
Automatic Also called Dynamic IP Address. This is the default, and the most
common.
Leave this selected if your ISP allocates an IP Address to the Wire-
less Router upon connection.