Airlink AR315W - Manual (Page 54)

50
Internet Access
Restrictions Select the desired options for the current group:
• None - Nothing is blocked. Use this to create the least restric-
tive group.
• Block all Internet access - All traffic via the WAN port is
blocked. Use this to create the most restrictive group.
• Block selected Services - You can select which Services are to
block. Use this to gain fine control over the Internet access for
a group.
Block by Schedule If Internet access is being blocked, you can choose to apply the
blocking only during scheduled times. (If access is not blocked, no
Scheduling is possible, and this setting has no effect.)
Define Schedule
Button Clicking this will open a sub-window where you can define or
modify the Schedule.
Services This lists all defined Services. Select the Services you wish to
block. To select multiple services, hold the CTRL key while select-
ing. (On the Macintosh, hold the SHIFT key rather than CTRL.)
Edit Service List
Button If you wish to define additional Services, or manage the Service list,
click this button to open the "Services" screen.
Buttons
Members Click this button to add or remove members from the current
Group.
If the current group is "Default", then members cannot be added or
deleted. This group contains PCs not allocated to any other group.
See the following section for details of the Group Members screen.
Define Schedule Click this to open a sub-window where you can define or modify
the Schedule.
Edit Service List If you wish to define additional Services, or manage the Service list,
click this button to open the "Services" screen.
Save Save the data on screen.
Cancel Reverse any changes made since the last "Save".
View Log Click this to open a sub-window where you can view the "Access
Control" log. This log shows attempted Internet accesses that have
been blocked by the Access Control feature.
Clear Log Click this to clear and restart the "Access Control" log, making new
entries easier to read.
Refresh Update the data on screen.