Airlink AR315W - Manual (Page 22)

18
Wireless Screen
The Wireless Router's settings must match the other Wireless stations.
Note that the Wireless Router will automatically accept both 802.11b and 802.11g connections,
and no configuration is required for this feature.
To change the Wireless Router's default settings for the Wireless Router feature, use the Wire-
less link on the main menu to reach the Wireless screen. An example screen is shown below.
Data - Wireless Screen
Identification
Station name On your PC, some Wireless status screens may display this name as the
Wireless Router in use.
Region Select your region from the drop-down list. This field displays the
region of operation for which the wireless interface is intended. It may
not be legal to operate the router in a region other than the region
shown here. If your country or region is not listed, please check with
your local government agency for more information on which channels
you are allowed to use, and select a region that allows those channels.
(The channel list changes according to the selected region.)
SSID
• If using an ESS (Extended Service Set, with multiple Wireless
Routers) this ID is called an ESSID (Extended Service Set Identi-
fier).
• To communicate, all Wireless stations should use the same
SSID/ESSID.