Alinco EJ-50U - Manual (Page 37)

37
8-3-8 SPATH command
Abbrev. SPATH default empty range 7 callsigns
example SPATH W1YYY,W1ZZZ
SPATH % (empty)
In the UISSID command, if the sender’s callsign SSID is 9 or 13, it sets the relay route to be added to the relay
station list. If SSID is in excess of 8, station won’t be added. Even if SPATH is empty, the relay with UISSID takes
place, but without adding the relay route. Enter % to intentionally clear the value.
8-3-9 EPATH command
Abbrev. EPATH default empty range 7 callsigns
example EPATH W1YYY,W1ZZZ
EPATH % (empty)
In UISSID command, sender’s callsign SSID is 10 or 14, it sets the relay route to be added to the relay station
list. An excess of 8 stations won’t be added. Even if EPATH is empty, the relay with UISSID takes place, but
without adding the relay route. Enter % to intentionally clear the value.
8-3-10 WPATH command
Abbrev. WPATH default empty range 7 callsigns
example WPATH W1YYY,W1ZZZ
WPATH % (empty)
In the UISSID command, if the sender’s callsign SSID is 11 or 15, it sets the relay route to be added to the relay
station list. IF the SSID is in excess of 8, station won’t be added. Even if WPATH is empty, the relay with UISSID
takes place, but without adding the relay route. Enter % to intentionally clear the value.
9 Multi-connection features
In this chapter, the multiple connection up to 10 stations will be explained.
9-1 Multi-Connect related commands
9-1-1 USERS Command
Abbrev. US default 1 range 0-10
example US 10
This command sets the maximum number of channels or connections a user may operate at the same time. [ 0
stands for 10, maximum number of channels usable.]
Each channel is called Stream, and designation of each stream is assigned as stream A to stream J. The K stream
is designated exclusively for the BBS and is not related to this command.
9-1-2 STREAMSW command
Abbrev. STR default $01 range 0 - $7F
example STR 1
This command is used to change the stream. When the code sent with this command (default is Ctrl+[A]) is
followed by A-J key, the stream will be changed to the one selected. If the wrong key is pressed, [? Link out of
range] a warning will be sent to the screen. When a packet is received, the stream name and stream change code
will appear, even when packets are received from streams other than one currently in use.
9-1-3 STREAMDB command
Abbrev. STREAMD default OFF range ON/OFF