Aquatic AV AQ-IP-3B - Manual (Page 14)

7. DUAL ZONE OPERATION
This unit is equipped with the advance feature “Dual Zone”. This function is useful if the user
want to select different modes of the audio output source for Front and Rear Speakers. The
details operation as follow;
On/Off operation
“Off” is the default setting.
Short Press the “2-Zone” button on the control panel or remote control to switch between Dual
Zone On or Off. The “2-Zone” icon will appear on the LCD after Dual Zone is selected “
”. ON
To Select Front / Rear Sources
Once “ON” is selected, the “AUDIO” button repeatedly to change between the F-Zone
(Front ) and the R-Zone (Rear) sources.
Press
If Front Zone “F-Zone” is selected, user has 10 seconds to navigate through different
modes by using the volume button.
Tuner > iPod > AV - 1 are available for selection for Front Speakers Audio Output.
If Rear Zone “R-Zone” is selected, user has 10 seconds to navigate through different modes
by using the volume button.
Tuner >iPod > AV - 1 are available for selection for Rear Speakers Audio Output
If no selection is being made within 5 seconds, the unit will resume to the pervious mode.
To operates function of Front / Rear Sources
The Front Panel & Remote control , is defaulted to control the FRONT source's function /
operation.
When DUAL ZONE is turned “ON”, the Mode button is used to change between the Front
Source & Rear Source. Press mode button repeatedly to change between Front and Rear
mode.
The LCD will display the Rear Source mode for 10 seconds. User has 10 seconds to make the
operation on the Rear Source's function on Front Panel or Remote.
The LCD display will automatically switch back to the Front Source after 10 seconds. And the
Front Panel and Remote now are resumed to operate for Front Source's function again.
The default setting when Dual Zone is “ON”
When DUAL ZONE is turned on, the audio output will be muted for about 1 second.
The default source / mode for
is Tuner & for Rear ZONE is “DVD”
The default Volume level is “12” for both Front & Rear ZONE audio output. (or the Volume Level
set as VOL PGM Level set in the Menu)
The LCD display is defaulted to display the Front Mode.
When Dual Zone is “ON”, some of the
:
Bass / Treble / Middle / Balance / Fader / Sub-woofer / iX-bass / 3D Gain
ZONE
audio function will not be functional, these function are
The default setting when Dual Zone is in “OFF” mode
The default audio output reverts to what the user selected for the FRONT Zone source when
DUAL ZONE IS “On”. For example: When the DUAL Zone is “ON “, user has selected CD for
Front ZONE & Tuner for Rear ZONE. Once DUAL ZONE is tuned “OFF”, Audio Output for all 4
speakers becomes “CD” mode.
E - 13
Note: iPod and XM can be used in either zone but not able to be used at the same time.