Aquatic AV AQ-IP-3B - Manual (Page 22)

ERROR Mechanism Error
Press the eject button to correct the problem.
If the error code does not disappear, consult
your nearest service dealer.
Symptom Cause Solution
No power The ignition is not on. If the power supply is properly connected
to the car accessory terminal, switch the
ignition key to “ACC”
The fuse is blown. Replace the fuse.
Volume is in minimum. Adjust volume to a desired level.
Wiring is not properly
connected. Check wiring connection.
The operation keys
do not work
No sound
The built-in microcomputer is
not operating properly due to
noise. Press the RESET button.
Front panel is not properly fixed into
its place
The antenna cable is not
connected.
Insert the antenna cable firmly.
The signals are too weak. Select a station manually.
The radio does not
work.
The radio station
automatic selection
does not work.
Before going through the check list, check wiring connection. If any of the problems persist
after check list has been made, consult your nearest service dealer.
13. TROUBLE SHOOTING
E - 21