Aquatic AV AQ-IP-3B - Manual (Page 7)

This unit is equipped with iPod Ready function which end user to have direct control of the
iPod on the front panel control button and display iPod song information on the unit's LCD display.
Please read below for more details operation
allows
Turning iPod Power On and Off
The iPod power turns on automatically as soon as it is connected to the 30 Pin Connector and as
. The iPod power can be turned OFF by removing the iPod from the 30
Pin Connector or if the vehicle's ignition is turned OFF. Under this condition the iPod will go into
pause mode and goes into sleep mode about 2 minutes later
long as the unit gets power
While the iPod is connected, the power cannot be turned on or off from the iPod itself.
“ ” to disconnect will be shown in the iPod's display while it is connected to the unit . Tips
iPod Battery Charging
While connected to the unit, the iPod will automatically start re-charging as long as the vehicle's
ignition key is turn to ACC or ON.
OK to disconnect
E - 6
iPod FULL CONTROL / OPERATION
iPod information Display on the Head Unit LCD
This unit can display the Song, Artist, Album name and Elapsed time on the LCD display, these
information can be displayed by pressing the AS/PS button repeatedly while a iPod Song file is
playing
Searching a Desire Song
Under iPod playback mode, press BAND to enter into the iPod Searching Mode. BAND
button repeatedly to the different searching methods as below :
Press the
access
1)
2)
3)
4)
5) Play list
Artist
Album
Song
Genre
Switch to iPod Mode
When the Head unit is on and iPod is connected to the 30 pin connector, press
the mode button to change to iPod mode and the unit will display for a while
then starts the music files contained in the iPod and the playback will
automatically start. Press Mode button repeatedly to change to other modes or switch back to
powered