ARM Electronics NDVR16 - Manual (Page 43)

43
Remote Viewer
General description: TCP/IP option of DVR and enables users to view live pictures, search recorded pictures,
far apart from the DVR unit, and users can store selected recorded pictures on HDD of client PC. DVR does
not adopted web browser method for access to DVR unit via Internet line, and you must install Remote Viewer
software included in the package on client PC before you try to access to DVR unit over IP network.
Notice: Advice monitor resolution to 800x600 or 1024x768
1. Live view via IP network
Click Remove Viewer icon to view live picture via IP network. You will see then following window.
Function of each button in live-view window :
1 Power switch. Press power switch to quit. Before press power switch button, press disconnect button
first.
2 Connect button. Press connect to connect to DVR unit via IP network to see live pictures of DVR unit.
You will see the same live pictures, which are displayed on monitor of DVR unit with a certain time
delay depending on transfer rate of IP network.
3 Disconnect button. Press disconnect button to cut connection to DVR unit via IP network.
4 Screen division button. You can select to see pictures of any single channel or 4 channels at the same
time. You can select channel number from 1 to 4 to see pictures of selected channel. If you selected 4,
you swill see channel number from 1 to 4 are all activated. channel.
5 Channel number button. You can select channel number to see live pictures from selected channel.