Eneo HDC-2180Z03 D - Manual (Page 22)

Operating Instructions
22
FULL-HD AF ZOOM CAMERA
• ZOOM RATIO : ON enables to display the zoom ratio on the bottom right
corner. OZx.x appears during the optical zoom and DZx.x will display by
multiplying the optical zoom ratio and the actual digital zoom ratio.
• FOCUS INDICATE : * mark on the bottom right corner indicates the focusing
status in blue during focusing and white after finishing.
• MANUAL : Sets to enhance the foggy video manually regardless of status
of scene.
• LEVEL : LOW, MID, HIGH
Video quality can be less in normal environments.
• AUTO : Enhance the foggy video automatically according to status of scene.
7-7. DEFOG (default: OFF)
ON enables to set off-centered location to be the center of zoom H-POINTER,
V-POINTER- Able to set the location of zoom center D-Zoom is available to
~ 32x. (See page No.25 “POINTING ZOOM”)
7-8. POINTING ZOOM
Able to zoom in for the preset area by PTZ controller.
7-9. PRESET ZOOM
• Set the direction of video by MIRROR/FLIP before POINTING ZOOM setting.
Otherwise location of zoom center could be different from your intention.
CAUTION
PRESET ZOOM
ZONE NUM
ZONE VIEW
H-POS
V-POS
O-ZOOM RATIO
D-ZOOM RATIO
STAYING ZOOMING
RETURN
↵
1
ON
5
5
3sec
OX2.0
DX2.0
RET ↵
By Remote Controlloer only.
• ZONE NUM : Set a number to select a preset zoom from 1~ 4.
• ZONE VIEW : ON enables a relevant preset zone.
• H-POS and V-POS : Adjust the size and position of preset zone.