Eneo HDB-2080M2810IR D - Manual (Page 23)

FULL-HD MEGA-PIXEL CAMERA
23
Operating Instructions
• Set the direction of video by MIRROR/FLIP before SMART MOTION ZOOM
setting. Otherwise ZOOM TARGET could be different from your intention.
CAUTION
: Detects and compensates the white pixels which become defective.
Once CALIBRATE is selected, the pixel calibration is initiated with lens closed
and can’t cancel.
8-4. PIXEL DEFECT (default: OFF)
• THRESHOLD : Defines the level of detection and low value detects more pixels.
Be sure to set the value so that the pixels are uniformly blinking over the entire
screen. Too low value will get the bad results because too many pixels are
detected as the bad pixels and the maximum number of pixels for compensation
will be filled by the upper area.
• EXECUTE ‘☟’: Long pressing will execute the pixel calibration for the detected
pixels. Menu will exit automatically after compensation.
: Camera title(name) can be set and edited up to 15 alpha numeric and symbolic
characters from ASCII codes(ENGLISH only). ▲,▼,◀,▶ moves the cursor to
next input. Choose a character and ‘☟’selects it. The selected characters are
added and displayed on the top left Corner and the cursor moves right automatically
for next input.
8-5. TITLE SET
• SP - Space is inserted when pressed ‘●’
• BS – Cursor moves back when pressed ‘●’
• CLR – Clears all the characters on input line when pressed ‘●’.
• POS – To be able to set the title position by ▲,▼,◀,▶ and ●.
NOTICE
: Zoom functions such as POINTING ZOOM, PRESET ZOOM, FLEX ZOOM
and SMART MOTION ZOOM are disabled intentionally to avoid the mis-
focusing at low light at night.
Area to be zoomed in by SMART MOTION ZOOM can be set at SPECIAL>
MOTION> SMART MOTION ZOOM>ZOOM TARGET. Adjusting ◀,▶
(Joystick) for ZOOM TARGET varies the viewing angle to be zoomed when
the motion occurs. (See page No.27 “SMART MOTION ZOOM”)
Set the video left and right and/or up and down by MIRROR/FLIP.
• STAY ZOOMING : Sets the duration time for zooming by Motion.