Eneo HDB-2080MIR - Manual (Page 18)

17
6.8 SPECIAL
PICTURE
MIRROR/FLIP
PRIVACY
MOTION
PIXEL DEFECT
TITLE SET
DISPLAY
DEFOG
POINTING ZOOM
RETURN
OFF
OFF
OFF
OFF
↵
↵
OFF
OFF
RET↵
SPECIAL Default Descriptions
MIRROR/FLIP OFF
Reverses the video left and right and/or up and down by MIRROR/FLIP.
OFF - Normal display without mirroring or flipping
Hor. – Video is reversed left and right.
Ver. – Video is reversed upside down.
HV – Video is reversed left and right and upside down.
When the video is reversed by Ver. or HV, then the joystick directions are
reversed accordingly. This feature is very useful when a camera in installed in
upside dawn.
PRIVACY OFF
10 Privacy zones which can be enabled individually by ZON DISP are available
to mask the video.
ZONE NUMBER – Set a number to select a privacy zone from 1~10.
ZONE DISP – ON enables a relevant privacy zone.
H-POS, V-POS, H-SIZE and V-SIZE – Adjust the size and position of zone.
COLOR – Select the color used for masking the zone form eight colors(1~8).
TRANSPARENCY – Enables to set OFF, 50%, 75%, 100%.
Defines the transparency for the mask zone.
MOTION OFF
MOTION can detect the changes in the motion window and displays the results
in blocks and/or a text message.
SENSITIVITY – Adjusts the detection sensitivity for motion.
High value increases the sensitivity to detect the small motion easily.
Too low sensitivity will cause the erratic detection by the tree leaves
or the light level changes.
H-POS,V-POS, H-SIZE and V-SIZE - Adjust the size and position of
the detection window.
BLOCK DISP – ON enables to display the blocks for the detected area.
MOTION OSD – ON enables to display a text message, ‘MOTION’,
SMART MOTION ZOOM – ON activates Automatic Zoom IN/OUT when motion
is detected.
Area to be zoomed in by SMART MOTION ZOOM can be set at SPECIAL>
MOTION> SMART MOTION ZOOM.
Adjusting◀,▶(Joystick) varies the viewing angle to be zoomed when the
motion occurs. See ‘6.8.1 SMART MOTION ZOOM’ for detail.
STAY ZOOMING – Sets the duration time for zooming by Motion.