Eneo HDB-2080MIR - Manual (Page 9)

8
5.2. Power Supply Connections
Camera can work with either 24AC or 12VDC, dual voltage power.
It is strongly required the polarity-matched connection for 12VDC supply, otherwise IR LEDs will
not operate at night.
Primary and secondary grounds are completely isolated to avoid the possible ground-loop problems.
In case that HD-SDI Inputs are not supported in Monitor, please use HD-SDI Converter to connect HD-
SDI cable with Monitor.
Some monitors for PC purpose in the market may not support 30p/25p and cannot
display picture. Please check Specification of Monitor before installation.
AC24V/DC12V (RED WIRE)
AC24V/GND (BLACK WIRE)
HD-SDI CABLE
RS-485