Installing an sfp+ transceiver module – H3C Technologies H3C S12500 Series Switches User Manual
Page 6
Advertising
6
SFP+ transceiver module and SFP+ DAC/AOC
cable installation guidelines
Installing an SFP+ transceiver module
Take an SFP+ transceiver module that you will install with the clasp at
the bottom as an example. Because the spring tab of the SFP+ socket
exerts an opposite push on the transceiver module, you need to press
the SFP+ transceiver module a little against the spring tab when
inserting it into the SFP+ socket, so that it can be inserted into the socket
in a parallel direction.
Figure 6 Installation practices
Correct installation practice:
•
For an SFP+ transceiver module that you will install with the clasp
at the bottom, there should be space between the transceiver
module top and the socket top when you are inserting it.
X
Advertising
This manual is related to the following products: