Network requirements – H3C Technologies H3C S3100V2 Series Switches User Manual

Page 52

Advertising
background image

44

Total 1 IP Group(s).

Total 1 IP Source(s).

Total 1 MAC Group(s).

Port flags: D-Dynamic port, S-Static port, C-Copy port

Subvlan flags: R-Real VLAN, C-Copy VLAN

Vlan(id):100.

Total 1 IP Group(s).

Total 1 IP Source(s).

Total 1 MAC Group(s).

Router port(s):total 1 port.

Eth1/0/1 (D) ( 00:01:23 )

IP group(s):the following ip group(s) match to one mac group.

IP group address:224.1.1.1

(0.0.0.0, 224.1.1.1):

Host port(s):total 1 port.

Eth1/0/4 (D)

MAC group(s):

MAC group address:0100-5e01-0101

Host port(s):total 1 port.

Eth1/0/4

Multicast source and user control policy configuration example

Network requirements

As shown in

Figure 17

, Switch A is a Layer-3 switch. It connects to multicast sources 1 and 2 and

through VLAN-interface 101 and VLAN-interface 102 respectively. It connects to the RADIUS server

through VLAN-interface 103 and to Layer-2 switch B through VLAN-interface 104.

Switch A runs IGMPv2 and Switch B runs IGMPv2 snooping. Multicast sources and hosts run

802.1X client.

A multicast source control policy is configured on Switch A to block multicast flows from Source 2 to

224.1.1.1.

A multicast user control policy is configured on Switch B so that Host A can join or leave only

multicast group 224.1.1.1.

Advertising