Configuration, Remote control and monitoring – Grass Valley 8937 v.1.0.0 User Manual
Page 16
16
8937/8937D Instruction Manual
Configuration
Configuration
The 8937 and 8937D can be controlled and monitored remotely using the
8900NET network interface GUI or a networked control panel. Operation
of these control types is explained in detail in their respective sections of
this manual.
Refer to the following sections for configuration instructions:
•
Remote Monitoring (
)
•
Control Panel Monitoring (
)
Remote Control and Monitoring
Module monitoring can be performed using a web browser GUI interface
when the 8900NET Network Interface module is present in the frame
(Gecko 8900TFN-V frame). This section describes the GUI access to the
module functions.
For remote access, make sure the jumper block on the module is set for both
Local and Remote access (
Refer to the
8900NET Network Interface Module Instruction Manual
for infor-
mation on the 8900NET Network Interface module and setting up and
operating the Gecko 8900 frame network.
Note
For optimal performance and access to the latest features, it is recommended
that the 8900NET module be updated to the latest software release. Check the
Grass Valley web site for the current 8900NET software.
Refer to the Gecko 8900 Frame Status page shown in
.
The 8900 modules can be addressed by clicking either on a specific module
icon in the frame status display or on a module name or slot number in the
link list on the left.
Note
The physical appearance of the menu displays on the web pages shown in
this manual represent the use of a particular platform, browser and version
of 8900NET module software. They are provided for reference only. Displays
will differ depending on the type of platform and browser you are using and
the version of the 8900NET software installed in your system.
Use the
Refresh
button to update the display (available with 8900NET soft-
ware version 3.2.0 and later).
The
Online Manual Link
button can be set up to link to the documentation in
pdf format. Link configuration is done on the Frame Configuration page as
described in the
8900NET Instructions Manual
.
For information on status and fault monitoring and reporting shown on the
Status page, refer to