Grass Valley 8964MON - Manual (Page 13)

8964MON Instruction Manual 13
Configuration
Configuration
The 8964MON can be configured locally using onboard switches or
remotely using the 8900NET network interface GUI or a networked control
panel.
Refer to the following sections for configuration instructions:
• Configuration Summary ( page 13 )
• Local Onboard Module Configuration ( page 15 )
• Remote Control and Monitoring ( page 18 )
• Control Panel Configuration ( page 18 )
Operation of these control types is explained in detail in their respective
sections of this manual.
Configuration Summary
This section provides a summary of all parameters that can be configured
on the 8964MON module. Use this section in conjunction with the specific
configuration method instructions for each configuration type.
Table 3 on
page 14 provides a summary in table format of all parameters and their
ranges, default values, and remote, local, and control panel function names
and locations for setting each value.
Composite Output Adjustments
The composite monitor output on each channel can be adjusted for the fol-
lowing:
• Enable or disable color bars test signal on each channel.
• Add Active Video Setup – add setup to active video in 525 mode.
• Output Video Gain – adjust the percent of output video gain relative to
1 V p-p.