Grass Valley iControl Solo v.6.00 User Manual
Page 53
iControl Solo
User Guide
49
Loudness Analyzer reloads the data stream using the new time range demarked by the
new start- and end-times.
2. Repeat
step 1
if you must zoom into the data plot further.
Generating a Loudness Analysis Report
Loudness Analyzer permits you to generate a report in PDF format. The report provides the
data currently displayed in Loudness Analyzer, including the chart at its current scaling
(zoom), as well as the parameters configured.
To generate a loudness analysis report
1. In Loudness Analyzer, click Report.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened a loudness data file in Loudness Analyzer (see
page 44
).
• You have adjusted the scaling of Loudness Analyzer’s data plot to the desired level
(see
"Zooming into Loudness Analyzer’s Data Plot"
, on page 47).
• You have selected the plot series you would like to include in your report and selected
the desired analysis parameters (see
"Configuring Loudness Analysis Parameters"
,
on page 45).