Grass Valley iControl Solo v.6.00 User Manual
Page 60
Using iControl Solo
Forcing a Same-Version Firmware Installation onto a Densité Card
56
2. In the Available package column, select the desired package.
3. In the Installed firmware column, take note of the upgrade path.
If the displayed upgrade path indicates that the card is not moving to a different firmware
version (for example, if the displayed upgrade path is
3.1.2 ‐> 3.1.2
), then to override the
firmware you must use the Force upgrade functionality. Otherwise, you may use the
Upgrade functionality.
1
4. Click Force upgrade.
A confirmation message appears.
5. Click Continue.
Note: Miranda recommends displaying the Installed firmware column of Densité
Upgrade Manager for this procedure. For steps on how to display this column,
see
"Viewing a Densité Card’s Installed Firmware Version"
, on page 60.
1. The real-world situation in which you will find it necessary to override typical Upgrade button functionality (that
is, to force an upgrade of same-version firmware from a selected package) would be if your installed firmware is a
Beta version and the embedded firmware in the selected package is the production version of firmware bearing
the same release number.