Grass Valley iControl Solo v.4.13 - Manual (Page 12)

Release Notes
Miranda Interface Updater
8
Miranda Interface Updater
• [Ref. 31326] iControl Solo now includes the Miranda Interface Updater as an integrated
component, available in the Tools menu.
New in Version 4.10
Software Installation
• [Ref. #31192] Starting with version 4.10, to launch iControl Solo, you need only open the
executable file available from Miranda’s technical support portal:
http://www.miranda.com/support/
On the Miranda technical support Web site, type iControl Solo in the Search support
database box, click the Search arrow, and then follow the download instructions.
Densité Services
• [Ref. #31399] HDA-1851: Support for the new HDA-1851 Densité card. The HDA-1851 card is
an HD/SD/ASI distribution amplifier with up to nine outputs and automatic equalization for
up to 140 meters. It also offers signal presence detection and remote reporting. The card’s
multiformat features make it ideal for applications where HD and SD signals may co-exist.
iControl Solo version 4.10 introduces firmware version 1.0.0 of the HDA-1851 Densité card.
• [Ref. #31399] HDA-1861: Support for the new HDA-1861 Densité card. The HDA-1861 card is
a reclocked HD/SD/ASI distribution amplifier with up to nine outputs and automatic
equalization for up to 140 meters. Reclocking of the video signals provides an additional
level of signal integrity in long cable length applications. The HDA-1861 DA supports both
HD-SDI (SMPTE-292M) and SDI (SMPTE-259M-C) and also offers signal presence detection
and remote reporting. iControl Solo version 4.10 introduces firmware version 1.0.0 of the
HDA-1861 Densité card.
• [Ref. #29511] HLP-1801: Support for firmware version 2.0.0. In addition to the LOCAL lipsync
probing mode, this firmware version allows you to use the remote fingerprint analyzer
offered with iControl Solo version 4.10. The HLP-1801 Densité card, using firmware
version 2.0.0, can send the audio and video fingerprint for lipsync analysis at the iControl
level.
• [Ref. #31025] SDA-1402: Support for the new SDA-1402 Densité card. The SDA-1402 card
has the same functionality as the SDA-1401 card but adds compatibility with the rear
connector panels of the HDA-18xx and HDA-19xx cards. iControl Solo version 4.10
introduces firmware version 1.0.0 of the SDA-1402 card.
• [Ref. #29986] XVP-3901: Support for firmware version 3.0.0. This version supports the
following additional enhancements:
• New AFD
• ALC4 additional programs
• 625 Teletext
• SPF Info Tab
• New 704-pixel resolution