Grass Valley iControl Solo v.4.13 - Manual (Page 16)

Release Notes
LGK-3901
12
LGK-3901

[Ref. #33964] The LGK-3901 Timecode’s Drop Frame value is wrongly displayed as Not Drop
Frame and vice versa.
Fixed in Version 4.12
Densité Services
• [Ref. #32038] The firmware version of a Dolby Digital or a Dolby E Encoder does not appear in
iControl Solo.
• [Ref. #31082] 3DX-3901: In the 3DX-3901 Control Panel, the Critical Health Failure alarm is
not visible in the Alarm Configuration panel.
• [Ref. #33089] FIO-1901: In the FIO-1901 Control Panel, when attempting to copy a FIO-1901
card’s alarm profile to other cards, the other cards are not visible in the Copy to other
cards menu.
Fixed in Version 4.11
Densité Services
• [Ref. #31472] HMP-1801: When selecting a Preload, a different clip than the one you chose
may cue and play.
• [Ref. #23734] Audio-streaming may intermittently cut off due to audio loss packets. This may
result in an audible tick or pop
Fixed in Version 4.10
• [Ref. #28868] IRD-3811: When the IRD-3811 control panel is opened and closed frequently,
the system CPU and memory usage may increase beyond expected levels.
• [Ref. #23734] Audio-streaming may intermittently cut off due to audio loss packets. This may
result in an audible tick or pop.
Fixed in Version 3.70
• [Ref. #27177/T103446] XVP-1801: After saving a user profile, and then restoring the factory
default settings, reloading the saved user profile may fail.
• [Ref. #25957] FXE-1501: The Rear module type and Fiber module type are missing in the
FXE-1501 Info panel in iControl Solo.
• [Ref. #25829] FXE-1501: The Link Loss FWD selection is missing from the FXE-1501 Config /
Status panel in iControl Solo.