Setting flying m/e – Grass Valley K2 Dyno S Replay Controller v.3.2 User Manual
Page 23
Advertising
2. Select
SHOW AUX
.
The Aux audio panel opens.
3. Select the pair of channels from the visible audio channels to be the source for Playlists Aux
audio.
4. Select
BACK
to return to the Audio panel.
Setting Flying M/E
When Flying M/E is selected, you can preset effect transitions between playback channels. Effects
are added when switching record streams during the replay of an item.
1. On the
HOME
screen, select
Flying M/E
.
2. To configure the effect for Flying M/E, select
CONFIG | EFFECTS
.
The Effects panel opens.
20140207
K2 Dyno S User Manual
23
Home Screen
Advertising
This manual is related to the following products: