Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 71)

4. To create a new end point for the clip and create a new clip beginning with the newly created
end point of the previous clip, press Shift then tap DIVIDE .
5. Cue the new event to the new In point for the clip and press In .
Changing the speed of an event in a playlist
1. Open the PLAYLIST screen.
2. Select and cue the playlist to be edited.
3. Select the event to change with a tap so it is outlined in blue.
4. Select the Event Properties panel from the lower left corner of the touch screen.
5. On the Event Properties panel, select the speed slot at the bottom of the column of slots on the
left side of the touch screen.
A number pad appears.
6. Enter the new speed as a percentage to be assigned to that specific event.
7. Select Enter to assign a new playback speed to that clip.
20140207 K2 Dyno S User Manual 71
Playlists