Extreme Networks Sentriant AG200 - Manual (Page 24)

Startup and Configuration
Sentriant AG200 Hardware Installation Guide 24
4 Respond to the Accept license agreement window in one of the following ways:
● If you do not wish to accept the license agreement, select I do not accept this license agreement.
or
● Read the Sentriant AG End-User License Agreement and select I Accept this license agreement.
5 Click Next. The Enter management server settings window opens.
Figure 7: Enter Management Server Settings Window
6 The Date and time area is pre-populated with values entered during the initial installation process.
Change any of the following as necessary:
● Region —Select a region from the drop-down list.
● Time zone —Select a time zone from the drop-down list.
● NTP servers —Enter one or more Network Time Protocol (NTP) servers (for example,
time.nist.gov), separated by commas. The NTP allows Sentriant AG to synchronize its date and
time with other endpoints on your network.
7 The Network settings area is pre-populated with values entered during the initial installation
process. Change any of the following as necessary:
● Host name —Enter a fully qualified domain name (FQDN) (for example, crocus.mycompany.com).
● DNS IP address —Enter one or more DNS resolver IP addresses, separated by commas,
semicolons, or spaces (for example, 10.0.16.100,10.0.1.1).