Extreme Networks Sentriant AG200 - Manual (Page 25)

Sentriant AG200 Hardware Installation Guide 25
8 If you use a proxy server, select Use a proxy server for Internet connections. (Connecting to the
Internet is necessary for updating tests, validating license keys, and sending support packages.)
Configure the following parameters for the proxy server:
● Proxy server IP address : IP address of the server that will act as the proxy for Internet
connections.
● Proxy server port : Port used for connecting to the proxy server (for example, 8080).
● Proxy server is authenticated : Select this parameter if your proxy server is authenticated, and
enter the following:
■ Authentication method: Scheme used to authenticate credentials on the proxy server from the
drop-down list. Select Basic, Digest, or Negotiable.
For more information about authentication methods, refer to the Sentriant AG Software
Installation Guide.
■ User name : ID of a user account on the proxy server
■ Password : Password of the user account having the ID specified in User ID
■ Re-enter password : The same password, entered a second time to help confirm accuracy
9 Click Next. The Enter license key window opens
Figure 8: Enter License Key Window
10 In the License key field, copy and paste your Sentriant AG license key, which was emailed to you as
a text file. Click Next. The Create administrator account window opens.
Figure 9: Create Administrator Account Window
NOTE
An internet connection is required to register and activate the license. The license key is registered to the server
after the activation is complete and cannot be moved to another machine without first contacting Technical
Assistance Center (TAC).