Grass Valley Kaleido-Solo Quick Start - Manual (Page 10)

Kaleido-X Hardware
– Description and Installation
8 | Loudness Monitoring and Analysis using Kaleido-Solo and iControl Solo
6. Navigate to Audio | Loud Ctrl, and make sure the
Meter is “Running”.

You may need to cycle the Meter through
“Paused” and “Running” if the Kaleido-Solo
doesn’t begin logging when started in the
“Loudness Logger” application (see Step 5).
7. Navigate to OSD | Loudness.
8. Select the on-screen display mode from among
these choices:
Off Disable any loudness chart.
Meter 1 Shows 1 loudness chart with
first program settings.
Meter 2 Shows 1 loudness chart with
second program settings.
Meter 1-2 Shows 2 compact loudness
charts with both first and
second program settings.
Full Screen Meter Shows a special loudness-
oriented layout.
See section 5.4.5 in the Kaleido-Solo User Manual
for more details about these options.