Grass Valley Kaleido-Solo Quick Start - Manual (Page 18)

Kaleido-X Hardware
– Description and Installation
16 | Loudness Monitoring and Analysis using Kaleido-Solo and iControl Solo
3. Click Add in the DensiteManager window
4. In the Target Information window:

Enter the IP address of your Kaleido-Solo in the Densite IP address
data box

Enter the name under which you would like the KS-910 to appear in
iControl in the Densite name databox.

Click OK
Back in the Densite Manager window, you will see that the
Kaleido Solo has been added.
5. Its status icon should be green, showing it is online. If not,
select it and click the Online button on the right.
6. Exit the Densite Manager by closing the window (click the red X icon in the upper right corner)