Grass Valley Kaleido-Solo Quick Start User Manual
Page 19
QUICK START GUIDE
Loudness Monitoring and Analysis using Kaleido-Solo and iControl Solo | 17
7. Back in the iControl Navigator window, double-click on the Loudness Logger associated with the AppServer
on which you will be logging.
A list of loudness monitoring resources will appear, including your KS-910.
Important note: If you followed the set-up process above, you will have established the path to the loudness
log storage and both the Loudness Logger and the Loudness Analyzer will use it. If you experience difficulties,
click the
Settings… button to open the Loudness Logger Settings screen, which shows the path, and provides
a link back to the setup process. This screen also allows you to configure alarm settings for the Loudness
Logger.
8. To start logging on an individual Kaleido-Solo, right-click on its icon and click Start
Alternatively, to start logging on all the loudness sources in the display, click the Start all button.
Look under “Status” and verify that logging is in progress.