Grass Valley Kaleido-Solo Quick Start User Manual
Page 14
Kaleido-X Hardware
– Description and Installation
12 | Loudness Monitoring and Analysis using Kaleido-Solo and iControl Solo
6. To specify the location for saving the loudness data, select the KS-910, and then click Settings
7. In the Loudness Logger Settings window, click the elipsis button to browse to the location in your local file
system where you would like to save loudness data.
IMPORTANT: Make sure you have sufficient storage space for loudness data
When specifying a location for storing loudness data, make sure you have enough
storage space available.
A Kaleido-Solo logging two audio programs may generate up to 18 MBytes/day of data
If the logger runs out of space when logging loudness data, it will stop logging.
Miranda recommends using a controlled remote storage device to ensure adequate
storage space.