Grass Valley Kaleido-Solo Quick Start User Manual
Page 8
Kaleido-X Hardware
– Description and Installation
6 | Loudness Monitoring and Analysis using Kaleido-Solo and iControl Solo
If the current firmware version is not 400 or above,
you must perform a firmware upgrade. An upgrade to
the latest version is always a good idea.
1. Go to the Miranda Support site at
and download the latest version of the firmware.
Unzip the file and save it in a convenient location.
2. Click on the Browse button to open the Choose
File to Upload dialog box. Browse to the upgrade
file (.bin file) downloaded and unzipped in 1.
3. Select the file and click Open. The file name will
appear in the Upgrade File data box, and the
Upgrade button will be enabled.
4. Click the Upgrade button to begin the upgrade
procedure.
5. A pop-up warning will appear, listing things you
should NOT do while the Kaleido-Solo is upgrading:
When you are ready to proceed, click OK.
The main window will show that the upgrade is in
progress, and remind you of the things NOT to do.
When the upgrade is complete, the main window
will notify you that it was successful, and advise you
that the Kaleido-Solo will reboot automatically.
The Kaleido-Solo will reboot.