Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 222)

222 KARRERA — Installation & Service Manual
Section 6 — External Interfaces
2. Select the Karrera source to be configured with the router on the left
scrolling list.
3. Touch the Video Input data pad and enter the number of the Karrera
input that will be used with the router video destination.
4. If the routed source will have an associated key signal, touch the
appropriate Key Input button, then touch the Key Input data pad and
enter the number of the Karrera input that will be used with the router
key signal destination.
Note If you assign a key input, the router system needs to be configured to switch
that key destination along with the video destination. Router levels can be
used to accomplish this.
5. Touch the Router type button to identify it as a routed Karrera source.
Note The adjacent status indicator is green when a router is detected, and red
when there is no response. If red, you should check the Karrera or router
system configuration or the physical Ethernet connections.
6. Touch the Router Destination data pad to open the Router Destinations
menu. The Karrera Video Processor Frame receives a list of destination
from the router and displays them on scrolling list on the left
(
Figure 162 ).
Figure 162. Router Destination Selection Menu