Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 96)

96 KARRERA — Installation & Service Manual
Section 5 — Basic Configuration
The default name for every Karrera Video Processor Frame is SystemA , and
this works well when only one system is present on the network. However,
if more than one Karrera system with the default name is present, all the
Frames and Control Panels will be grouped under that name.
If you have more than one Karrera system, be sure to change the name of
the Video Processor Frames so you can identify them easily. When each
Frame has a unique name, the Control Panels configured with each Frame
will be grouped with that system name.
The name of a Karrera Video Processor Frame (and Karrera system name)
can be changed in several ways. Once changed by any method, any prop-
erly refreshed user display will report that changed name. The Video Pro-
cessor Frame name can be changed with:
• GV Switcher Installer Program,
• Video Processor Frame web page,
• Karrera Menu Application Frame Suite Nodes & ID Menu, and
• NetConfig.
Set IP Procedure Using GV Installer Program
1. Ensure the Menu Panel or PC has an IP address able to communicate
with the Karrera system components and is physically connected to the
Karrera network.
2. Double click on the Kayenne Installer icon. The GV Switcher Installer
program will be launched ( Figure 55 ).