Name file – Grass Valley 1200 Operation Manual User Manual
Page 132
3-86
Section 3 — Controls & Menus
Name File
The file Name (Figure 3-44) menu is found under the [Disk] top-
level menu. From the Disk Menu screen the submenu path is:
■
File Name Menu
- Press [SAVE>] then [SET NAME] to access
the menu
NOTE:
You may use an external keyboard to enter these characters if
so desired. These menus will not appear if a keyboard is attached to the
control panel.
1.
Select each character by turning the soft knobs located to the
right of the menu display.
2.
Enter the selected character by pressing the [ACCEPT CHAR]
soft button. The new character will be displayed in the menu.
3.
Continue selecting characters in this manner until the name is
spelled out in the menu.
4.
Press [ACCEPT NAME] to store the name. The system
automatically returns to the previous menu.