Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 48)

Configuring Dual Node Network Ports
Digital News Production 47
Step A. Enabling Jumbo Frames
(Optional) Click on the check box to enable jumbo frames (or to disable them
when already enabled). Using standard frames, packet size is 1.5K. Using
jumbo frames, the packet-size is 9K. Jumbo frames improve performance.
NOTE: For information on using IP addresses in a network, refer to
“Basics of IP Addresses” on page 42.
When setting new IP addresses, the following requirements must be met:
For Port 0, these addresses must be on the same subnet:
• Node 1, Public IP address
• Node 1, Private IP address
• Node 2, Public IP address
• Node 2, Private IP address