Grass Valley NV9649 v.1.1 - Manual (Page 86)

74
Configuration
Button Definitions
Source
Master Means “source is the master” and makes the source device the master. Other-
wise, the destination is the master. This button (and these concepts) apply only
to machine control routes.
The button definition has no fields to configure. Its legend is arbitrary.
The button is a toggle: Press it once to make the source the master (it goes high-
tally); press it again to make the destination the master (the button is low-tally).
A panel option allows you to make “source is master” the default. In this case, the
button still toggles between “source is master” and “destination is master,” and
the button, if present, is high-tally by default.
The ‘Source is Master’ button is also used to initiate “broadcast” machine control
routes. See
Broadcast Routes on page 90.
Source Mode The button places the panel in source mode. Category selections in source mode
select source devices. Category buttons that are not source categories become
disabled in source mode.
Categories that include both source and destinations appear in both source
mode and destination mode.
The button definition has no fields to configure. Its legend is arbitrary.
Src/Dst Mode The button toggles between source and destination modes. Category selections
in source mode select source devices. Category selections in destination mode
select destination devices.
The button definition has no fields to configure. Its legend is arbitrary.
Take In normal mode, a take button routes the preset source to the selected destina-
tion on selected level or levels.
In salvo mode, a take button executes a selected salvo.
A take button is disabled (and dark) until it is possible for the operator to execute
a take.
Configurers should provide the operator a ‘Take’ button. The button definition
has no fields to configure. Its legend is arbitrary.
Undefined This button type is a placeholder: during configuration, it makes the button
undefined and inactive. On the actual panel, the undefined button remains unlit
(dark).
Type Description (under NV9609 Mode)