HEIDENHAIN TNC 320 (340 551-02) - Manual (Page 379)

HEIDENHAIN TNC 320 379
1
0
.1
0 Ent
e
ri
ng F
o
rm
ulas Dir
e
ctly
Programming example
Calculate an angle with the arc tangent from the opposite side (Q12)
and adjacent side (Q13); then store in Q25.
To select the formula entering function, press the
Q key and FORMULA soft key.
Enter the parameter number.
Shift the soft-key row and select the arc tangent
function.
Shift the soft-key row and open the parentheses.
Enter Q parameter number 12.
Select division.
Enter Q parameter number 13.
Close parentheses and conclude formula entry.
Example NC block
PARAMETER NO. FOR RESULT?
37 Q25 = ATAN (Q12/Q13)
25
12
13