HEIDENHAIN TNC 320 (340 551-02) - Manual (Page 420)

420 12 MOD Functions
12.1 MOD F
u
nctions
12.1 MOD Functions
The MOD functions provide additional input possibilities and displays.
The available MOD functions depend on the selected operating mode.
Selecting the MOD functions
Call the operating mode in which you wish to change the MOD
functions.
8 To select the MOD functions, press the MOD key.
Changing the settings
8 Select the desired MOD function in the displayed menu with the
arrow keys.
There are three possibilities for changing a setting, depending on the
function selected:
„ Enter only the number
„
Change the setting by pressing the ENT key
„
Change a setting via a selection window. If more than one possibility
is available for a particular setting, you can superimpose a window
listing all of the given possibilities by pressing the GOTO key. Select
the desired setting directly by pressing the arrow keys and then
confirming with ENT. If you don’t want to change the setting, close
the window again with END.
Exiting the MOD functions
8 Close the MOD functions with the END key or END soft key.