Epson PRO 4800 - Manual (Page 132)

6-132
132 | Solving Problems
INVALID INK
CRTG B Ink light on You tried to install the
wrong ink cartridge. If you are installing ink cartridges for the first
time, you must install the cartridges that came
with your printer.
If you are replacing ink cartridges, check the
package and product code. You must use the
ink cartridges designed for your printer. Other
cartridges will not work.
LOAD PAPER Paper light
on
Paper lever is in the
released position while
loading paper. After you finish loading paper, pull the paper
lever all the way forward, to the secured
position.
LOAD ROLL
PAPER
LOAD SHEET
PAPER IN P.
TRAY
Paper light
on
Paper source setting in
printer driver is
different from control
panel. Make sure the right paper is loaded and the
paper source setting is the same on the control
panel and printer driver.
LOWER INK
LEVERS
LOWER L (or R)
INK LVR
— One or both ink levers
are raised. Pull the lever or levers down to lock the ink
cartridges.
MNT REQ. — A printer part will need
to be replaced soon. Note the code number and contact Epson as
described on page 10.
MNT TK NEAR
FULL — The maintenance tank
is almost full. Make sure you have a replacement
maintenance tank. See page 121.
MNT TNK FULL B Ink light on The maintenance tank
is full. Replace the maintenance tank. See page 121
for instructions.
NO BORDERLESS
WITH THIS SIZE
RELOAD PAPER
Note:
These messages
alternate.
— Borderless setting
selected for A2-size
sheets (11.7 × 16.5) Change the setting in the printer driver, or load
different-size paper.
NO INK CRTG B Ink light on Ink cartridge(s) not
installed or ink lever
raised. Install ink cartridges (page 109) or lower the ink
lever.
NO MNT TNK — The maintenance tank
is not installed. Make sure the maintenance tank is fully
inserted. See page 121 for instructions.
NOT STRAIGHT
RELOAD Paper light
on
Cut sheet paper is not
loaded straight. Load the paper correctly.
Message Light Explanation Response
sp4800Guide.book Page 132 Tuesday, March 7, 2006 3:49 PM