Epson PRO 4800 - Manual (Page 134)

6-134
134 | Solving Problems
SERVICE REQ. All lights
flashing The print head is
locked.
An error has occurred.
Pull out the green tab to unlock the print head.
See page 18.
Note the error number, then turn the printer off
and back on. If the message remains, contact
Epson as described on page 10.
SET INK CRTG — Ink cartridge chip error. Remove and reinstall the ink cartridge. If the
message remains, replace the cartridge.
SET PAPER
LEVER Paper light
on
Paper lever was
released during the
printing process or
another operation. Pull the lever all the way forward, to the
secured position. Start printing again from the
beginning for best results.
TOP COVER
OPEN — Top cover is open. Close the top cover.
UNABLE TO
PRINT — You tried to print while
an error condition was
present. Press the Pause button to exit the
SelecType menu system. If the message
appears again, clear the error before you print.
WRONG INK
CRTG B Ink light on You tried to install the
wrong ink cartridge. If you are installing ink cartridges for the first
time, you must install the cartridges that came
with your printer.
If you are replacing ink cartridges, check the
package and product code. You must use the
ink cartridges designed for your printer. Other
cartridges will not work.
WRONG PAPER
SIZE Paper light
flashing
Loaded paper does not
match the image size. Make sure the size you selected in the printer
driver matches the loaded paper size. Load the
correct size paper if necessary.
Message Light Explanation Response
sp4800Guide.book Page 134 Tuesday, March 7, 2006 3:49 PM