Epson PRO 4800 - Manual (Page 87)

4-87
Printing with Epson Drivers for Windows | 87
The Roll Paper (Banner) setting allows you to print a series of
continuous images without any margin space between them. This
option is not available with all applications.
3. If you want to print without margins, click Borderless. Note that
borderless printing takes longer than normal printing. See page 89 for
more information about borderless printing.
Click Expansion . Choose Auto Expand or Retain Size , then click
OK :
• Auto Expand enlarges your image (up to 3%) to fit the size of the
paper. You can use the slider to adjust the expansion. Choose Min
for the least amount of image expansion (with a chance that there
will be small borders around the edges) or
Max for the greatest
amount of expansion (some of the image will be cut off around the
edges, but it will extend to the edge of the paper).
• Retain Size prints your image at the size you specify in your
application. You need to size it slightly wider than the paper width if
you want to print without borders.
4. Choose one of the following Auto Cut settings:
• Off disables automatic cutting. Choose this setting if you want to
operate the cutter manually, print multiple print jobs without
cutting, or if you are printing on heavy media that must be cut by
hand. See page 55 for instructions on operating the cutter manually.
• Single Cut causes the images to be printed end-to-end and saves
paper. With borderless printing, you may see a sliver of the previous
or next image.
• Normal Cut allows margin space at the top and bottom of each
image.
• Double Cut extends the space between images and trims each print
individually. This provides the cleanest edge for borderless printing.
5. Select the size of your image as the paper size.
Tip: Creating a
user-defined paper
size generally lets you
make the best use of
your roll paper.
sp4800Guide.book Page 87 Tuesday, March 7, 2006 3:49 PM