Epson PRO 4800 - Manual (Page 63)

3-63
Printing with Epson Drivers for Macintosh | 63
3. Click the Paper Size pop-up menu and choose a size and one of the
options:
• The standard size setting prints on cut sheet paper with a bottom
margin larger than the top and sides.
• Borderless (Auto Expand) prints on cut sheets and enlarges your
image (up to 3%) to fit the width of the paper (without side
borders).
• Borderless (Retain Size) prints your image at the size you specify
in your application. You need to size it slightly wider than the paper
width to print without side borders.
• Maximum reduces the bottom margin (available for printing on
plain paper sheets only).
• Roll Paper - Banner prints a series of continuous images without
any margin space between them, but with normal side borders.
• Roll Paper - Borderless (Auto Expand) prints without borders on
roll paper and enlarges your image (up to 3%) to fit the size of the
paper. This selection is recommended for borderless printing with
minimal clipping of your image.
• Roll Paper - Borderless (Retain Size) prints your image on roll
paper at the size you specify in your application. You need to size it
slightly wider than the paper width to print without borders.
• Roll Paper - Borderless Banner prints a series of continuous
borderless images without space between them.
• Roll Paper prints on roll paper with the standard printable area.
Select the paper size,
then choose the setting
sp4800Guide.book Page 63 Tuesday, March 7, 2006 3:49 PM