HEIDENHAIN iTNC 530 (340 49x-04) ISO programming - Manual (Page 12)

12
New functions with 340 49x-03
„ The AFC function (Adaptive Feed Control) was introduced (see
“Adaptive Feed Control Software Option (AFC)” on page 608)
„ The global parameter settings function makes it possible to set
various transformations and settings in the program run modes (see
“Global Program Settings (Software Option)” on page 600).
„ The TNC now features a context-sensitive help system, the
TNCguide (see “The Context-Sensitive Help System TNCguide
(FCL3 Function)” on page 167).
„ Now you can extract point files from DXF files(see “Selecting and
storing machining positions” on page 260).
„ Now, in the DXF converter, you can divide or lengthen laterally
joined contour elements (see “Dividing, extending and shortening
contour elements” on page 258).
„ In the PLANE function the working plane can now also be defined
directly by its axis angle (see “Tilting the working plane through axis
angle: PLANE AXIAL (FCL 3 function)” on page 500).
„ Now, in Cycle 22 ROUGH-OUT, you can define a feed-rate reduction if
the tool is cutting on its entire circumference (FCL3 function, see
“ROTATION (Cycle G122),” page 405).
„ In Cycle 208 BORE MILLING, you can now choose between climb or
up-cut milling (see “BORE MILLING (Cycle G208)” on page 325).
„ String processing has been introduced in Q parameter programming
(see “String Parameters” on page 548).
„ A screen saver can be activated through machine parameter 7392
(see “General User Parameters” on page 654).
„ The TNC now also supports a network connection over the NFS V3
protocol (see “Ethernet Interface” on page 629).
„ The maximum manageable number of tools in a pocket table was
increased to 9999 (see “Pocket table for tool changer” on page
202).
„ The system time can now be set through the MOD function (see
“Setting the System Time” on page 650).