Enterasys Networks 1G58x-09 - Manual (Page 58)

Startup and General Configuration Summary
Command Defaults Descriptions
3-10 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.1.2 Command Defaults Descriptions
Each command description in this guide includes a section entitled “Command Defaults” which
contains different information than the factory default settings on the device as described in
Table 3-1 and Table 3-2 . The command defaults section defines CLI behavior if the user enters a
command without optional parameters (indicated by square brackets [ ]). For commands without
optional parameters, the defaults section lists “None”. For commands with optional parameters, this
section describes how the CLI responds if the user opts to enter only the keywords of the command
syntax.
Figure 3-1 provides an example.
Figure 3-1 Sample Command Default Description
show port status [port-string]
Command Defaults
If port-string is not specified, status information for all ports will be displayed.