Enterasys Networks 1G58x-09 - Manual (Page 786)

Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-104 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to display all flow limiting limits and actions:
Table 14-8 provides an explanation of the command output.
Matrix>show flowlimit limit
Flow limit status - enabled
Flow limit notifications - disabled
Flow limit shutdown - disabled
Flow limit notification interval - 120
Flow limit maximum flowcount - 128000
Flow limit table
----------------
Limit Action
---- -----
User port
limit 1 1
limit 2 0
Server port
limit 1 0
limit 2 0
Aggregation port
limit 1 0
limit 2 0
Interswitch link
limit 1 0
limit 2 0
Unspecified
limit 1 0
limit 2 0
Table 14-8 show flowlimit Output Details
Output What It Displays...
Flow limit status Whether FST is enabled or disabled. Default state of
disabled can be changed with the set flowlimit command
(
Section 14.3.9.2 ).
Flow limit
notification Whether flow limit notification (SNMP trap) is enabled or
disabled. Default state of disabled can be changed with the
set flowlimit notification command (
Section 14.3.9.7 ).