Enterasys Networks 1G58x-09 - Manual (Page 593)

IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 12-37
Example
This example shows how to use traceroute to display a round trip path to host 192.167.252.46. In
this case, hop 1 is an unnamed router at 192.167.201.2, hop 2 is “rtr10” at 192.4.9.10, hop 3 is
“rtr43” at 192.167.208.43, and hop 4 is back to the host IP address. Round trip times for each of the
three ICMP probes are displayed before each hop. Probe time outs are indicated by an asterisk (*):
Matrix>Router#traceroute 192.167.225.46
Traceroute to 192.167.225.46, 30 hops max, 40 byte packets
1 10.00 ms 20.00 ms 20.00 ms 192.167.201.2
[]
2 20.00 ms 20.00 ms 20.00 ms 192.4.9.10 [ enatel-rtr10.enatel.com ]
3 240.00 ms * 480.00 ms 192.167.208.43
[
enatel-rtr43.enatel.com
]
4 <1 ms * 20.00 ms 192.167.225.46 [ enatel-rtr46.enatel.com ]
TraceRoute Complete