LeMond RevMaster Classic - Manual (Page 29)

Page 23
handle clockwise to secure the seat.
6. Ensure that the handle does not stick out to the right or left. Each
handle is spring loaded so that you can properly align the frame and
the handle. Simply pull out on the handle and rotate it for correct
alignment.
SEAT POST
1. Remove the seat from the seat post.
2. Support the seat post with one hand.
3. Use your other hand to rotate the seat post adjustment handle
counterclockwise.
4. Unscrew the seat post adjustment handle halfway out from the
frame.
5. Lift the seat post out of the frame.
6. Insert the new seat post into the frame. Position the seat post in
the desired location and rotate the seat post adjustment handle
clockwise to secure the seat post.
7. Ensure that the handle does not stick out to the right or left. Each
handle is spring loaded so that you can properly align the frame and
the handle. Simply pull out on the handle and rotate it for correct
alignment.
8. Reinstall the seat.
TENSION KNOB ASSEMBLY
1. Turn the tension knob counterclockwise to remove tension.
2. Remove the 2 mounting screws from the black plastic cover, below
the knob.
3. Unscrew the plastic acorn nut from the bottom of the tension knob
assembly.
4. Pull the bottom spring off the brake tension rod and out from the main
frame.
5. Lift the tension knob assembly out from the frame.
6. Install the new tension knob assembly by reversing steps 1-5.
FIGURES