Connecting peripheral devices, Typical connection example – Edirol 4-CHANNEL V-4 User Manual
Page 17
17
Connecting peripheral devices
Connecting peripheral devices
This section explains how to connect your peripheral devices to the V-4. You can connect up to four video
playback devices (sources). Here’s how to connect sources such as a video camcorder, VCR, DVD player, or DV-
7PR, and play them back to create an impressive video performance. To prevent malfunction and/or damage to
other devices, always turn down the volume, and turn off the power on all devices before making any connec-
tions.
Typical connection example
*
The V4 does not have audio inputs so will not mix audio. Audio outputs can be connected directly to speakers or via an
audio mixer if mixing of audio from multiple devices is necessary.
*
No video cables come with this product. Please use appropriate video cables for connection with source devices or TV
monitor/Projector.
*
It is recommended to use composite cable rather than S-video cable where you need to connect devices long distances
(unless using S-video amplifiers). If devices are installed closer to the V-4, it is recommended to use S-video cables so that
you can obtain better image quality.
*
If both video (composite) and S-video signals are input simultaneously to the same channel (channel 1 or 2 only), the S-
video signal will take priority.
VCR
Camcorder
Preview Monitor
Projector
DVD
DV-7PR
V-4_e.book 17 ページ ２０１０年３月１１日 木曜日 午後１時５１分